Main Features of EPS 2D CNC Shape Cutting Machine:
- The machine makes use of controlling the X-axis and the Y-axis to combine them into a graph. At the same time, the resistance wire is used to cut all kinds of EPS products. Its operation route is to make use of the graphics inputted into the computer, and automatically sends impulse signals to control the X and Y axes. When the machine is equipped with a rotation device, the 3D (three- dimensional) can be realized;
- Two methods: To directly use AutoCAD to draw or to scan the graphics and then input them into the computer;
- The Single-Wire CNC Shape Cutting Machine is applicable to cutting products with big volumes or in small numbers;
- The Multiple-Wire CNC Shape Cutting Machine is applicable to cutting products with small volumes or in large quantities. The Resistance Wire Cutting System can use 20 resistance wires at the same time, after inputting the graphics into the computer all the resistance wires can run in parallel, and can cut 20 complicated 3D (three- dimensional) shapes per each cutting.
|1||Max. Products Size||mm||2000x1240x1240||3000x3000x1240||4000x4000X1240|
|2||Hot Cutting Wire Length||mm||2000||3000||4000|
|2||Min. Cutting Thickness||mm||0-1240||0-1240||0-1240|
|4||Number of Operating|
Hot Wire Simultaneously
|5||Hot Wire Specification||mm||0.4-0.8||0.4-0.8||0.4-0.8|
|11||Cutting Mode||Three Dimension||Three Dimension||Three Dimension|
|12||Max. Contour Size||mm||2500x2000x2500||3500x3500x2500||4500x4500x2500|
|13||Machine Net Weight||kg||1800||2300||2800|
How useful was this post?
Click on a star to rate it!
Average rating / 5. Vote count:
Hello eps cutting machine
EPS foam board cutting machine
2019 Latest Version Atc CNC Router EPS Cutting Mac...
full automatic and continuous hot wire cutting lin...
Syntec controller eps foam cutting machine
automatic block molding machine generationII